Linetec explains how to maximize protection for aluminum surfaces

Application of polymask

Protecting aluminum surfaces before and after finishing is crucial to a completed project. You invest heavily in the quality finish of your products and rejected or damaged material can affect your bottom line in several ways.

One of the most popular methods of aluminum protection is a polyethylene based surface protective film, often referred to as polymask. Polymask products are designed to prevent abrasion, marring, scratching, and staining of exposed surfaces during manufacturing, finishing, assembly and delivery.

Polyethylene based, polymask products offer either an acrylic or rubber adhesive system. Acrylic adhesives are best used for architectural aluminum as rubber adhesive systems are ultra-aggressive and can be extremely difficult to remove. The strength of the adhesiveness is referred to as a number, and the larger the number the stronger the hold. Most polymask material is available with an adhesiveness up to 120.

Polymask material with too strong of adhesive

It is important to match the protection film adhesivenss to the material surface to ensure ease of removal without trace or damage to the aluminum. Linetec uses a Poli-Film brand water-based acrylic polymask with an adhesiveness of 48 on most material packaged in our facility. In some cases, where the finished aluminum surface is extremely delicate, an adhesiveness of 20 is used.  A key point to remember is that the polymask only needs to stick to the aluminum surface, it should not be difficult to remove.

Using too strong of an adhesive can cause several issues including:

  • increased labor hours to remove
  • residue left behind, that cannot be seen,  may not be removed by paint or anodize pretreatment systems and can lead to a flawed finish
  •  damage to mill aluminum and /or the aluminum’s finish

Polymask material is a temporary protective covering that should not be left on material for a prolonged period of time. Storage conditions should:

  • avoid any direct sunlight, and keep within a closed building
  • maintain a temperature of 45° to 80° F
  • maintain a steady humidity range between 20% to 80%
  • be kept dry and free from all water, oils, or other contaminants
  • ensure material is kept away from extreme pressure, material stacked in crates for shipping purposes should not be left stacked on top of each other

These conditions generally dictate that masked surfaces not be subjected to prolonged storage, and the protective masking be removed as soon as possible.

Good adhesive for easy removal

Plasticizer migration, or discoloring of the painted or anodized finish, can occur from improper or prolonged storage of polymasked material.

Water staining is also a serious problem that can occur because of improper procedures, either during packaging or storage. In the presence of moisture, and under certain conditions, the mill aluminum will stain. Aluminum will stain when water is trapped between wraps, sheets, or other mating material. If air flow is not allowed to remove the water, prolonged contact between the water and mill aluminum causes a reaction between the two which results in water staining.

Polymask offers solutions for varying material types and shapes, and a broad range of finishes with varying gloss levels. Using the correct film type and adhesiveness offers optimum protection for your projects.

Touch-Up Paint – How to Apply and When to Use

What is Touch-up Paint

Upon request, and dependent on job size, applicators may supply a limited amount of touch-up paint with completed projects. Touch-up paint is supplied in small aerosol cans or bottles with a built in brush for easy application. It is intended to cover small blemishes or to touch-up exposed cut ends on fabricated parts.

The touch-up paint provided by Linetec is the same paint used on your project with a cure additive made available by the paint manufacturers. Each paint type has its own additive that changes the paint from an oven-cured product to a non-oven cured one. Touch-up paint does not have the same adhesion or durability as the factory applied coatings, and will exhibit chalking and fading characteristics at a noticeably faster rate than that of your building painted with a baked-on PVDF (Kynar®) finish. Therefore, it is recommended that touch-up paint be used as sparingly as possible, no more than a few square inches, as any touch-up will become faded in contrast with the original building color after only a few years.

What is Kynar® ADS

Field repair to interior sills damaged during installation

Kynar® ADS (Air-dry System) coatings are designed for repairing, restoring, and/or repainting the metal on buildings that have a factory applied PVDF (Kynar®) coating. Kynar® ADS can also be used for painting materials that will not tolerate the elevated bake temperatures required by spray-applied PVDF coatings. Kynar® ADS coatings can only be applied by a licensed fluoropolymer applicator, such as Linetec and its field service and restoration team.

Kynar® ADS coatings are based on a fluoropolymer-acrylic resin system, intended for use as a two-coat system. Kynar® ADS provides very good fade, chalk, UV degradation, and chemical resistance characteristics.


When applying touch-up use extreme caution as excessive use may void the original finisher’s warranty. Because of the serious liabilities involved with field touch-up, Linetec prefers not to manufacture or sell touch-up products but will sell larger quantities (quarts) only under a no liability clause with an authorized signature.

Any job requiring Linetec field repair using ADS because of an unlikely Linetec finish issue is warranted in parallel with the Linetec factory warranty.

Field repair projects utilizing the Kynar® ADS system are warranted on an individual basis; the standard warranty for field finishing is 5 years from date of completion. Other warranty options are used depending upon the base metal condition, site location, type of damage, etc.

For directions on how to apply touch up, and when use visit our touch-up paint web page