Regardless of its durability, no architectural finish is completely maintenance-free. Periodic cleaning is needed and, in such cases, on-site repair and restoration may be necessary. Here are five things to keep in mind when looking into on-site finishing services:
- Start at the source Whether it is graffiti removal, premature paint chalking and fading, or an anodized surface needing to be refinished, begin by talking to the original finisher to see if they can correct the issue with their on-site team. If this isn’t a practical option or they don’t offer field repairs, please contact us to discuss a plan for restoring your finish to its intended appearance
- Go with the pros For any large refinishing project, consult a professional service. On-site restoration and repair of sizeable architectural projects require specialized equipment and knowledgeable professionals. As projects like these typically are performed on occupied buildings, an experienced partner also can help minimize disruptions with appropriate scheduling and communication.
- Performance counts Ask if the coatings being applied during restoration and repair meet the American Architectural Manufacturers Association (AAMA) specifications of the original finish application. One solution may be a PVDF resin-based air-dry coating that is field-applied by a qualified, professional finisher. Developed to meet green building criteria, these tough properties of these coatings resist marring and abrasion, and require little maintenance.
- Take care with touch-up For minor scratches and blemishes, some applicators may supply a limited amount of touch-up paint. These are fairly easy to apply, but remember that they are only intended to cover a small area. It does not have the adhesion or durability of factory-applied coating, and will deteriorate at a faster rate. For best results, follow all instructions that come with touch-up paint and use it very sparingly. Also, when applying touch-up, use extreme caution as excessive use may void the original finisher’s warranty.
- Know your warranty On-site project warranties vary greatly depending on the project and situation. If the issue being repaired is an applicator or manufacturer issue, the warranty most often will parallel the manufacturer’s factory warranty. For field repair and restoration work unrelated to a factory-applied issue, warranty options may be applicable depending on the base metal condition, base finish condition, site location or type of damage. Read carefully to understand the terms and timeline.
Learn more about Linetec’s on-site repair and restoration services by clicking here. For personalized assistance or to request a site visit, please contact Linetec’s field service manager, Dale Robinson, by emailing email@example.com or calling 888-717-1472.